2mm Thick Celluloid Red Tortoise Shell Guitar Blank XL Sheet for 1-ply Pickguards

This is a very hard to find high-quality .08” extra thick (nearly 3/32”) 100% real translucent celluloid with the classic vintage deep red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars and mandolins. 11” x 14” x .08” (280mm x 356mm x 2mm) - Large enough for multiple guitar pickguards like a Gibson J-50, Southern Jumbo, J-200, etc. (see diagrams).

Whole sheet 11” x 17" x .11" (280mm x 432mm x 2.75mm)  5-ply ABS Plastic Blank sheets black/white/black/thicker white/black. Perfect material for: Gibson ES-335, ES-330, etc. and many other guitars and basses.

Note: Sheets have thicker bottom white or ivory layer like Gibson material

Whole sheet 11” x 17" x .11" (280mm x 432mm x 2.75mm)  5-ply ABS Plastic Blank sheets black/ivory/black/thicker ivory/black. Perfect material for: Gibson ES-335, ES-330, etc. and many other guitars and basses.

Note: Sheets have thicker bottom white or ivory layer like Gibson material

1 - 7 1/4” x 10 1/2" x 1/8” large blank sheet of Gibson Super 400 marble pickguard material 

Very hard to find high-quality thick marble cellulose acetate pickguard material. One sheet is enough material for two Gibson Super 400 non-cut-away acoustic pickguards, when nested together (see diagram).

Pictures shown are representative of the sheet you will receive but all sheets are nearly identical. 

1 - 7" x 11" x .03” small blank sheet of thin translucent celluloid fire stripe material for guitar pickguards. The same material used by Gibson on most of their pre-war flat-top guitars.

Very hard to find high-quality thin 100% real celluloid  material with the vintage tiger stripe/fire stripe pattern seen on so many Gibson flat-top guitars. Each sheet is enough material for two to three small pickguards like a Gibson L-00, J-35, or J-45, or 2 larger pickguards like a Gibson J-50. Diagram shown is for size reference only.

1 sheet - 7” x 11" x .08” (178 x 280 x 2mm) medium sized sheet of extra thick translucent celluloid tortoise shell for guitar and mandolin pickguards.

This is a very hard to find high-quality .08” thick (nearly 3/32”) 100% real celluloid with the classic vintage deep red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars and mandolins. Each sheet is enough material for two large pickguards like a Gibson L-5 or two mandolin and one guitar pickguards, etc. Sample layout shown for reference purposes only.

1 - 5” x  7" x .03” small blank sheet of thin translucent celluloid fire stripe material for guitar pickguards. The same material used by Gibson on most of their pre-war flat-top guitars.

Very hard to find high-quality thin 100% real celluloid  material with the vintage tiger stripe/fire stripe pattern seen on so many Gibson flat-top guitars. Each sheet is enough material for one small pickguard similar to a Martin D-18 or OM, or a Gibson L-00, J-35, or J-45. Diagram shown is for size reference only.

1 sheet - 7” x 11" x .018” medium sized sheet of thick translucent celluloid tortoise shell for guitar pickguards.

This is hard to find high-quality extra thin 100% real celluloid with the classic vintage reddish-amber tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars. Each sheet is enough material for large pickguards like a Gibson J-50, Country & Western or two small pickguards similar to a Martin D-18 or OM, or a Gibson J-45 or L-00. 

1 - 5” x  7" x .018” small blank sheet of thin translucent celluloid tortoise shell for guitar pickguards 

This is a very hard to find high-quality thin 100% real celluloid that has a classic vintage reddish-amber tortoise shell pattern seen on so many pre-1970 acoustic guitars. Each sheet is enough material for one small pickguard similar to a Martin D-18 or OM, or a Gibson J-45 or L-00. Diagram shown is for size reference only.