This is a new custom-made replacement pickguard for a 1960s-era Gibson Hummingbird flat-top guitar. It is a very accurate reproduction of the legendary Hummingbird design that is engraved into 3/32" thick red swirl acrylic tortoise material and hand-painted in the classic 2-color motif of white and yellow. Hand-buffed glossy finish. 60 degree beveled edges. Also comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar.

New hand-made replacement pickguard for the Gibson SJ-200 cut-away flat-top guitars. Made from thick 100% real celluloid tortoise shell material with the entire design engraved and hand-painted in a two-color scheme of antique white and bright yellow. Unlike Gibson pickguards, this is not a printed pattern or decal on the surface and will not wear off. Hand-buffed glossy finish. 60-degree beveled edges. Comes with 3M adhesive transfer backing, so all you have to do is peel and stick it on your guitar.

New hand-made replacement pickguard for the Gibson J-200 Montana Gold flat-top guitars. Made from thick 100% real celluloid tortoise shell material with the entire design engraved and hand-painted in antique white. Unlike Gibson pickguards, this is not a printed pattern or decal on the surface and will not wear off. Hand-buffed vintage gloss finish. 60-degree beveled edges (except the edge against the fingerboard). Comes with 3M adhesive transfer backing, so all you have to do is peel and stick it on your guitar. Will also fit many other similar SJ-200-style guitars.

Brand new custom engraved and hand-painted matching set (left and right) guitar pickguards w/ inlaid MOP dots. This design comes from Gibson’s Players Edition replica of Bob Dylan’s personal customized SJ-200. It's made with 1/8" thick opaque black acrylic and the entire design is engraved and hand-painted in white with 10 inlaid real mother-of-pearl dots. Hand-buffed glossy finish including polished 60 degree beveled edges (except the edge against the fingerboard). 4 1/16” diameter sound hole cutout and will fit other large flat-tops with 4” diameter sound holes.

Brand new hand-made replacement pickguard c1939-1954 Gibson vintage J-200 SJ-200 flat-top guitars. The look of an original aged pickguard but a brand-new product. Made from high quality .05" thick 100% real celluloid tortoise shell and the entire design is engraved and hand-painted in off-white with orange dots. Unlike Gibson pickguards, this is not a printed pattern or decal on the surface and will not wear off. Hand-buffed glossy finish. 60-degree beveled edges (except the edge against the fingerboard).

New hand-made matching set (right-handed & left-handed) replacement pickguards for Gibson J-200 SJ-200 flat-top guitars. Made from thick 100% real celluloid tortoise shell material with the entire rose design engraved and hand-painted in a two-color scheme of red and green (not a printed pattern or decal on the surface). Hand-buffed vintage gloss finish. 60-degree beveled edges. Comes with 3M adhesive transfer backing, so all you have to do is peel and stick it on your guitar. Will also fit many other similar SJ-200-style guitars.

New hand-made replacement pickguard for Gibson J-200 SJ-200 flat-top guitars. Made from thick 100% real celluloid tortoise shell material with the entire rose design engraved and hand-painted in a two-color scheme of red and green (not a printed pattern or decal on the surface). Hand-buffed vintage gloss finish. 60-degree beveled edges. Comes with 3M adhesive transfer backing, so all you have to do is peel and stick it on your guitar. Will also fit many other similar SJ-200-style guitars.

New hand-made replacement pickguard for c1955 or after Gibson J-200 SJ-200 flat-top guitars. Made from thick orange swirl tortoise acrylic material with the entire design engraved and hand-painted in gold (not a printed pattern or decal on the surface). Hand-buffed vintage gloss finish. 60-degree beveled edges (except the edge against the fingerboard). Comes with 3M adhesive transfer backing, so all you have to do is peel and stick it on your guitar. Will also fit many other similar SJ-200-style guitars.

Brand new custom engraved and hand-painted guitar pickguard w/ inlaid MOP dots. This design comes from Gibson’s Players Edition replica of Bob Dylan’s personal customized SJ-200. It's made with 1/8" thick opaque black acrylic and the entire design is engraved and hand-painted in white with 10 inlaid real mother-of-pearl dots. Hand-buffed glossy finish including polished 60 degree beveled edges (except the edge against the fingerboard). 4 1/16” diameter sound hole cutout and will fit other large flat-tops with 4” diameter sound holes.

Brand new hand-made replacement pickguard for a Gibson J-200 Elvis Presley flat-top acoustic guitar. It’s a very accurate reproduction of the legendary design Elvis had on his guitar. The entire design is engraved and hand-painted white into 1/16” thick black acrylic plastic. This not a printed design and will not wear off. Hand-buffed gloss finish with 60 degree beveled edges. Also comes with 3M adhesive transfer tape backing, so all you have to do is peel and stick it on your guitar.